2:1 Heat Shrink Tubing for Electrical Cable Management
Heat shrink tube, also known as heat shrinkable tubing, is crafted from advanced polymer materials. Its most distinctive feature lies in its ability to tightly contract around the object it encases when exposed to heat. At Dongguan Zhonghe Electronics Co., Ltd, our heat shrink tubes are meticulously manufactured using top-tier polyolefin, fluoroplastic, silicone rubber, and polyester. Each material imparts unique and outstanding properties, enabling our heat shrink tubes to meet the diverse and exacting demands of different industries.
Table 1 Performance characteristics of HF Flame Retardant Heat Shrink Tube
| Property |
Testing Method |
Performance index |
| Physical property |
Tensile strength/MPa |
GB/T1040 |
≥10.4 |
|
| Elongation at break/% |
GB/T1040 |
≥200 |
|
| Tensile strength after thermal aging/MPa |
UL224;158ºC×168hr |
≥7.3 |
|
| Elongation at break after thermal aging/% |
UL224;158ºC×168hr |
≥100 |
|
| Heat shock resistance |
UL224;250ºC×4hr |
Not sticky, non-cracked |
|
| Cold bending resistance |
UL224;-30ºC×1hr |
non-cracked |
|
| Electrical performance |
Withstand voltage |
300V |
UL224 |
1500V,1min no breakdown |
|
| 600V |
UL224 |
2500V,1min no breakdown |
|
| Breakdown strength/KV/mm |
GB/T1408 |
≥15 |
|
| Volume resistivity/Ω•cm |
GB/T1410 |
≥1×1014 |
|
| Chemical property |
Copper stability |
UL224;158ºC×168hr |
PASS |
|
| Corrosion resistance |
UL224;158ºC×168hr |
PASS |
|
| Flame retardancy |
UL224 |
☆ |
|
Note: ☆ indicates that the flame retardant performance of yellow and white needs to be improved, and the transparent heat shrink tube is not flame retardant.
Table 2 Product Dimensions of H-CB Tube
(HF Flame Retardant Thin Wall Heat Shrinkable Tube)
Size
(mm) |
Preshrink Size(mm) |
Size after Shrinkag(mm) |
Pack |
Range of Application (mm) |
| Inter Diameter |
Wall Thickness |
Inter Diameter |
Wall Thickness |
| Φ0.6CB |
0.9±0.2 |
0.13±0.05 |
≤0.40 |
0.20±0.10 |
200 |
0.4~0.7 |
| Φ0.8CB |
1.1±0.2 |
0.13±0.05 |
≤0.50 |
0.20±0.10 |
200 |
0.6~0.8 |
| Φ1.0CB |
1.40±0.2 |
0.13±0.05 |
≤0.65 |
0.20±0.10 |
200 |
0.7~1.0 |
| Φ1.5CB |
1.90±0.2 |
0.13±0.05 |
≤0.85 |
0.20±0.10 |
200 |
0.9~1.4 |
| Φ2.0CB |
2.40±0.2 |
0.13±0.05 |
≤1.00 |
0.22±0.10 |
200 |
1.1~1.8 |
| Φ2.5CB |
2.90±0.2 |
0.13±0.05 |
≤1.30 |
0.25±0.10 |
200 |
1.4~2.3 |
| Φ3.0CB |
3.40±0.2 |
0.13±0.05 |
≤1.50 |
0.28±0.10 |
200 |
1.6~2.7 |
| Φ3.5CB |
3.90±0.2 |
0.13±0.05 |
≤1.80 |
0.28±0.10 |
200 |
1.9~3.2 |
| Φ4.0CB |
4.40±0.2 |
0.15±0.05 |
≤2.00 |
0.30±0.10 |
200 |
2.1~3.6 |
| Φ4.5CB |
4.90±0.2 |
0.15±0.05 |
≤2.30 |
0.30±0.10 |
100 |
2.4~4.0 |
| Φ5.0CB |
5.50±0.2 |
0.15±0.05 |
≤2.5 |
0.32±0.10 |
100 |
2.6~4.5 |
| Φ6.0CB |
6.50±0.2 |
0.15±0.05 |
≤3.0 |
0.32±0.10 |
100 |
3.1~5.4 |
| Φ7CB |
7.50±0.3 |
0.15±0.05 |
≤3.5 |
0.32±0.10 |
200 |
3.7~6.3 |
| Φ8CB |
8.50±0.3 |
0.15±0.05 |
≤4.0 |
0.32±0.10 |
200 |
4.2~7.2 |
| Φ9CB |
9.50±0.3 |
0.15±0.05 |
≤4.5 |
0.35±0.10 |
200 |
4.7~8.0 |
| Φ10CB |
10.5±0.3 |
0.15±0.05 |
≤5.0 |
0.35±0.10 |
200 |
5.2~9.0 |
| Φ11CB |
11.5±0.3 |
0.18±0.05 |
≤5.5 |
0.40±0.10 |
200 |
5.7~10.0 |
| Φ12CB |
12.5±0.3 |
0.20±0.05 |
≤6.0 |
0.40±0.10 |
200 |
6.2~11.0 |
| Φ13CB |
13.5±0.3 |
0.20±0.05 |
≤6.5 |
0.40±0.10 |
200 |
6.7~12.0 |
| Φ14CB |
14.5±0.3 |
0.20±0.05 |
≤7.0 |
0.40±0.10 |
200 |
7.3~13.0 |
| Φ15CB |
15.5±0.4 |
0.20±0.05 |
≤7.5 |
0.40±0.10 |
200 |
7.8~14.0 |
| Φ16CB |
16.5±0.4 |
0.22±0.05 |
≤8.0 |
0.40±0.10 |
200 |
8.3~15.0 |
| Φ17CB |
17.5±0.4 |
0.22±0.05 |
≤8.5 |
0.40±0.10 |
200 |
8.8~16.0 |
| Φ18CB |
18.5±0.4 |
0.22±0.05 |
≤9.0 |
0.42±0.10 |
200 |
9.3~17.0 |
| Φ20CB |
20.5±0.5 |
0.25±0.05 |
≤10.0 |
0.45±0.10 |
200 |
10.5~19.0 |
| Φ22CB |
22.5±0.5 |
0.25±0.05 |
≤11.0 |
0.45±0.10 |
200 |
11.5~20.5 |
| Φ25CB |
25.5±0.5 |
0.25±0.05 |
≤12.5 |
0.45±0.10 |
100 |
13.0~24.0 |
| Φ28CB |
28.5±0.5 |
0.30±0.08 |
≤14.0 |
0.60±0.10 |
100 |
14.5~27.0 |
Table 3 Product Dimensions for H tube (HF Flame Retardant Heat Shrink Tube)
Size
(mm) |
Preshrink Size
(mm) |
Size after Shrinkag(mm) |
Old packaging |
New packaging |
Range of Application
(mm) |
| Inter Diameter |
Wall Thickness |
Max Inter Diameter |
Wall Thickness |
Meter/Roll |
| Φ0.5 |
0.8±0.2 |
0.18±0.05 |
≤0.30 |
0.33±0.10 |
400 |
400 |
0.3~0.6 |
| Φ0.6 |
0.9±0.2 |
0.18±0.05 |
≤0.40 |
0.33±0.10 |
200 |
400 |
0.4~0.7 |
| Φ0.8 |
1.1±0.2 |
0.18±0.05 |
≤0.50 |
0.33±0.10 |
200 |
400 |
0.6~0.8 |
| Φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.65 |
0.36±0.10 |
200 |
400 |
0.75~0.9 |
| Φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.85 |
0.36±0.10 |
200 |
400 |
0.95~1.4 |
| Φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.00 |
0.45±0.10 |
200 |
400 |
1.1~1.8 |
| Φ2.5 |
3.0±0.2 |
0.20±0.05 |
≤1.30 |
0.45±0.10 |
200 |
400 |
1.35~2.3 |
| Φ3.0 |
3.5±0.2 |
0.20±0.05 |
≤1.50 |
0.45±0.10 |
200 |
400 |
1.6~2.7 |
| Φ3.5 |
4.0±0.2 |
0.23±0.05 |
≤1.80 |
0.45±0.10 |
200 |
400 |
1.85~3.2 |
| Φ4.0 |
4.7±0.2 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
400 |
2.1~3.6 |
| Φ4.5 |
5.0±0.2 |
0.28±0.05 |
≤2.30 |
0.56±0.10 |
100 |
200 |
2.35~4.0 |
| Φ5.0 |
5.5±0.2 |
0.28±0.05 |
≤2.50 |
0.56±0.10 |
100 |
200 |
2.6~4.5 |
| Φ5.5 |
6.0±0.2 |
0.28±0.05 |
≤2.80 |
0.56±0.10 |
100 |
200 |
2.9~5.0 |
| Φ6.0 |
6.5±0.2 |
0.28±0.05 |
≤3.00 |
0.56±0.10 |
100 |
200 |
3.1~5.4 |
| Φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.50 |
0.56±0.10 |
100 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.3 |
0.30±0.05 |
≤4.00 |
0.56±0.10 |
100 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.3 |
0.30±0.08 |
≤4.50 |
0.56±0.10 |
100 |
100 |
4.7~8.0 |
| Φ10 |
10.5±0.3 |
0.30±0.08 |
≤5.00 |
0.56±0.10 |
100 |
100 |
5.2~9.0 |
| Φ11 |
11.5±0.3 |
0.30±0.08 |
≤5.50 |
0.56±0.10 |
100 |
100 |
5.7~10 |
| Φ12 |
12.5±0.3 |
0.30±0.08 |
≤6.00 |
0.56±0.10 |
100 |
100 |
6.2~11 |
| Φ13 |
13.5±0.3 |
0.35±0.10 |
≤6.50 |
0.56±0.10 |
100 |
100 |
6.7~12 |
| Φ14 |
14.5±0.3 |
0.35±0.10 |
≤7.00 |
0.70±0.10 |
100 |
100 |
7.3~13 |
| Φ15 |
15.5±0.4 |
0.35±0.10 |
≤7.50 |
0.70±0.10 |
100 |
100 |
7.8~14 |
| Φ16 |
16.5±0.4 |
0.35±0.10 |
≤8.00 |
0.70±0.10 |
100 |
100 |
8.3~15 |
| Φ17 |
17.5±0.4 |
0.35±0.10 |
≤8.50 |
0.70±0.10 |
100 |
100 |
8.8~16 |
| Φ18 |
19.0±0.5 |
0.35±0.10 |
≤9.00 |
0.70±0.10 |
100 |
100 |
9.3~17 |
| Φ20 |
22.0±0.5 |
0.40±0.12 |
≤10.00 |
0.83±0.15 |
100 |
100 |
10.4~19 |
| Φ22 |
24.0±0.5 |
0.40±0.12 |
≤11.00 |
0.83±0.15 |
100 |
100 |
11.4~21 |
| Φ25 |
26.0±0.5 |
0.45±0.12 |
≤12.50 |
0.90±0.15 |
50 |
50 |
12.8~24 |
| Φ28 |
29.0±0.5 |
0.45±0.12 |
≤14.00 |
0.90±0.15 |
50 |
50 |
14.4~29 |
| Φ30 |
31.5±1.0 |
0.45±0.12 |
≤15.00 |
1.00±0.15 |
50 |
50 |
16~29 |
| Φ35 |
36.5±1.0 |
0.45±0.12 |
≤17.50 |
1.00±0.15 |
50 |
50 |
18~34 |
| Φ40 |
41.5±1.0 |
0.50±0.15 |
≤20.00 |
1.00±0.15 |
50 |
50 |
21~39 |
| Φ45 |
46.5±1.0 |
0.50±0.15 |
≤22.5 |
1.00±0.20 |
25 |
25 |
23.5~44 |
| Φ50 |
≥50 |
0.50±0.15 |
≤25.0 |
1.00±0.20 |
25 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30.0 |
1.30±0.25 |
25 |
25 |
35-55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤36.0 |
1.30±0.25 |
25 |
25 |
40-65 |
| Φ80 |
≥80 |
0.70±0.18 |
≤41.0 |
1.46±0.30 |
25 |
25 |
45-75 |
| Φ90 |
≥90 |
0.70±0.18 |
≤46.0 |
1.46±0.30 |
25 |
25 |
50-88 |
Note: Φ30 and above specification products default to G tube (environmental performance in line with EU RoHS2.0(2011/65/EU standard).
1. Operating Conditions
1.1 The ambient temperature for continuous use: -55°C to 125°C.
1.2 It can be used for a long time under acidic and alkaline conditions.
1.3 It can be used for a long time under strict environmental protection requirements.
2. Appearance Requirements
2.1 There are no obvious scratches, unevenness, or bamboo-joint-like defects on the surface of the product.
2.2 The surface is smooth, free of oil stains and dust accumulation.
2.3 The printing is clear, without ghosting, excess ink, incomplete printing, or slipping.
3. Heat Shrinkage Performance
3.1 The initial shrinkage temperature is 70°C; the full shrinkage temperature is 125°C.
In accordance with the UL224 standard, the full-shrinkage temperature is 200°C for 3 minutes.
3.2 The longitudinal shrinkage rate does not exceed ±5%.
4. Performance Characteristics of Materials
The physical and chemical properties of the materials comply with the provisions in Table 1.
The product dimensions of halogen-free flame-retardant thin-wall heat-shrinkable sleeves comply with the provisions in Table 2.
The product dimensions of halogen-free flame-retardant heat-shrinkable sleeves comply with the provisions in Table 3.
Standard colors: black, red, blue, yellow, green, white. Other colors such as purple, gray, brown, etc. can be customized according to customer requirements.
To achieve optimal results with our heat-shrinkable sleeve, it's crucial to ensure thorough shrinkage. We recommend utilizing a forced-air constant-temperature oven, meticulously maintaining a shrinkage temperature of 125°C. Be aware that upon placing the sleeve in the oven, the temperature may initially dip, requiring time to stabilize at the desired setting. Additionally, sufficient time must be allotted for the sleeve to attain full shrinkage via the hot air circulation within the oven. Therefore, allow the sleeve to remain in the oven until it reaches the set temperature and maintains that precise heat for approximately 3 minutes, ensuring complete and flawless shrinkage.
8. Application Field
8.1 Insulation Protection for Electronics Internal Wiring
8.2 Insulation Protection for Electronics Internal Wiring
8.3 Waterproof and Dust-Proof for Communication Cables
8.4 Protection for Household Wire Connections
8.5 Materials for DIY Jewelry Making
Company Profile
Dongguan Zhonghe Electronics Co., Ltd. is a distinguished and pioneering enterprise that excels in the innovation, production, and sales of advanced polymer-modified protective materials. We offer comprehensive, one-stop solutions tailored to our clients' needs. Established in 2010, we proudly call Qingxi Town, Dongguan City our home base. In a significant expansion in 2020, we inaugurated a state-of-the-art branch factory in Jiangsu, sprawling over a magnificent 15,000 square meters, to further our commitment to excellence.
Our business philosophy at Dongguan Zhonghe Electronics Co., Ltd. is as harmonious and cooperative as our name suggests: Unity and Win-Win Cooperation. Our dedicated team upholds the mission of 'Escorting the Internet of Things,' passionately working to deliver profound value and unparalleled satisfaction to our cherished clients. We warmly welcome both domestic and international customers to visit us for fruitful discussions and collaborations!
Proudly serving a vast clientele spread across 102 countries, both domestically and internationally, Dongguan Zhonghe Electronics Co., Ltd. has won the trust of over 3,000 customers. Annually, the protective sleeves we manufacture can encircle the globe three times, with an impressive 60 million meters dedicated to the dynamic automotive sector. Our esteemed reputation as a long-term supplier to major automobile OEMs and globally recognized companies is a testament to our unwavering commitment to quality and innovation.
Certifications
Zhonghe Electronics stands proudly with its prestigious certifications: ISO9001, IATF16949 for superior quality management, and ISO14001 for environmental stewardship. Our production management is enhanced by the state-of-the-art MES system, which ensures unrivaled product consistency, and achieves 5% less loss compared to industry peers. We boast a distinguished professional R&D team and cutting-edge laboratory, holding an impressive array of 5 invention patents and 18 utility model patents. Dedicated to innovation, we introduce 3-5 groundbreaking products annually, expertly tailored to fulfill evolving customer requirements.
Exhibition & Our Partners
Packaging & Shipping
01 : Why choose us?
A: 1. With over 15 years of unparalleled expertise in this industry, we are committed to providing unmatched quality and service!
2. Research and development capacity- Our esteemed technical team is equipped to innovate and tailor products to precisely meet customer requirements!
3. Our dedicated professional sales team is here to deliver exceptional service tailored to your needs!
02 : What's the MOQ for your production?
A: We welcome both large and small orders. Please reach out to us for further details and personalized assistance.
03: Can I expect to get the sample? How long can I expect to get it?
A: Absolutely! We offer complimentary samples for testing, which will reach you in approximately 4-6 days.
Delivery is dependent on geographical distance and the chosen courier service.
04 : Can you do the design for us?
A: Yes, as a premier manufacturer, we are fully capable of creating custom designs tailored to your specifications.
05 : What's your payment term?
A: A convenient 30% T/T Deposit with the balance payable before shipment ensures a smooth transaction.
06 : What's the list of certificates you hold?
A: We proudly hold prestigious certifications such as IATF16949, RoHS, CE, EN45545 Test Report, and the ELV Test report.
Audited Supplier 
){kind=link}