2:1 Heat Shrink Tubing for Electrical Cable Management
Heat shrink tube, also known as heat shrinkable tubing, is crafted from advanced polymer materials. Its most distinctive feature lies in its ability to tightly contract around the object it encases when exposed to heat. At Dongguan Zhonghe Electronics Co., Ltd, our heat shrink tubes are meticulously manufactured using top-tier polyolefin, fluoroplastic, silicone rubber, and polyester. Each material imparts unique and outstanding properties, enabling our heat shrink tubes to meet the diverse and exacting demands of different industries.
Table 1 Performance characteristics of HF Flame Retardant Heat Shrink Tube
| Property |
Testing Method |
Performance index |
| Physical property |
Tensile strength/MPa |
GB/T1040 |
≥10.4 |
|
| Elongation at break/% |
GB/T1040 |
≥200 |
|
| Tensile strength after thermal aging/MPa |
UL224;158ºC×168hr |
≥7.3 |
|
| Elongation at break after thermal aging/% |
UL224;158ºC×168hr |
≥100 |
|
| Heat shock resistance |
UL224;250ºC×4hr |
Not sticky, non-cracked |
|
| Cold bending resistance |
UL224;-30ºC×1hr |
non-cracked |
|
| Electrical performance |
Withstand voltage |
300V |
UL224 |
1500V,1min no breakdown |
|
| 600V |
UL224 |
2500V,1min no breakdown |
|
| Breakdown strength/KV/mm |
GB/T1408 |
≥15 |
|
| Volume resistivity/Ω•cm |
GB/T1410 |
≥1×1014 |
|
| Chemical property |
Copper stability |
UL224;158ºC×168hr |
PASS |
|
| Corrosion resistance |
UL224;158ºC×168hr |
PASS |
|
| Flame retardancy |
UL224 |
☆ |
|
Note: ☆ indicates that the flame retardant performance of yellow and white needs to be improved, and the transparent heat shrink tube is not flame retardant.
Table 2 Product Dimensions of H-CB Tube
(HF Flame Retardant Thin Wall Heat Shrinkable Tube)
Size
(mm) |
Preshrink Size(mm) |
Size after Shrinkag(mm) |
Pack |
Range of Application (mm) |
| Inter Diameter |
Wall Thickness |
Inter Diameter |
Wall Thickness |
| Φ0.6CB |
0.9±0.2 |
0.13±0.05 |
≤0.40 |
0.20±0.10 |
200 |
0.4~0.7 |
| Φ0.8CB |
1.1±0.2 |
0.13±0.05 |
≤0.50 |
0.20±0.10 |
200 |
0.6~0.8 |
| Φ1.0CB |
1.40±0.2 |
0.13±0.05 |
≤0.65 |
0.20±0.10 |
200 |
0.7~1.0 |
| Φ1.5CB |
1.90±0.2 |
0.13±0.05 |
≤0.85 |
0.20±0.10 |
200 |
0.9~1.4 |
| Φ2.0CB |
2.40±0.2 |
0.13±0.05 |
≤1.00 |
0.22±0.10 |
200 |
1.1~1.8 |
| Φ2.5CB |
2.90±0.2 |
0.13±0.05 |
≤1.30 |
0.25±0.10 |
200 |
1.4~2.3 |
| Φ3.0CB |
3.40±0.2 |
0.13±0.05 |
≤1.50 |
0.28±0.10 |
200 |
1.6~2.7 |
| Φ3.5CB |
3.90±0.2 |
0.13±0.05 |
≤1.80 |
0.28±0.10 |
200 |
1.9~3.2 |
| Φ4.0CB |
4.40±0.2 |
0.15±0.05 |
≤2.00 |
0.30±0.10 |
200 |
2.1~3.6 |
| Φ4.5CB |
4.90±0.2 |
0.15±0.05 |
≤2.30 |
0.30±0.10 |
100 |
2.4~4.0 |
| Φ5.0CB |
5.50±0.2 |
0.15±0.05 |
≤2.5 |
0.32±0.10 |
100 |
2.6~4.5 |
| Φ6.0CB |
6.50±0.2 |
0.15±0.05 |
≤3.0 |
0.32±0.10 |
100 |
3.1~5.4 |
| Φ7CB |
7.50±0.3 |
0.15±0.05 |
≤3.5 |
0.32±0.10 |
200 |
3.7~6.3 |
| Φ8CB |
8.50±0.3 |
0.15±0.05 |
≤4.0 |
0.32±0.10 |
200 |
4.2~7.2 |
| Φ9CB |
9.50±0.3 |
0.15±0.05 |
≤4.5 |
0.35±0.10 |
200 |
4.7~8.0 |
| Φ10CB |
10.5±0.3 |
0.15±0.05 |
≤5.0 |
0.35±0.10 |
200 |
5.2~9.0 |
| Φ11CB |
11.5±0.3 |
0.18±0.05 |
≤5.5 |
0.40±0.10 |
200 |
5.7~10.0 |
| Φ12CB |
12.5±0.3 |
0.20±0.05 |
≤6.0 |
0.40±0.10 |
200 |
6.2~11.0 |
| Φ13CB |
13.5±0.3 |
0.20±0.05 |
≤6.5 |
0.40±0.10 |
200 |
6.7~12.0 |
| Φ14CB |
14.5±0.3 |
0.20±0.05 |
≤7.0 |
0.40±0.10 |
200 |
7.3~13.0 |
| Φ15CB |
15.5±0.4 |
0.20±0.05 |
≤7.5 |
0.40±0.10 |
200 |
7.8~14.0 |
| Φ16CB |
16.5±0.4 |
0.22±0.05 |
≤8.0 |
0.40±0.10 |
200 |
8.3~15.0 |
| Φ17CB |
17.5±0.4 |
0.22±0.05 |
≤8.5 |
0.40±0.10 |
200 |
8.8~16.0 |
| Φ18CB |
18.5±0.4 |
0.22±0.05 |
≤9.0 |
0.42±0.10 |
200 |
9.3~17.0 |
| Φ20CB |
20.5±0.5 |
0.25±0.05 |
≤10.0 |
0.45±0.10 |
200 |
10.5~19.0 |
| Φ22CB |
22.5±0.5 |
0.25±0.05 |
≤11.0 |
0.45±0.10 |
200 |
11.5~20.5 |
| Φ25CB |
25.5±0.5 |
0.25±0.05 |
≤12.5 |
0.45±0.10 |
100 |
13.0~24.0 |
| Φ28CB |
28.5±0.5 |
0.30±0.08 |
≤14.0 |
0.60±0.10 |
100 |
14.5~27.0 |
Table 3 Product Dimensions for H tube (HF Flame Retardant Heat Shrink Tube)
Size
(mm) |
Preshrink Size
(mm) |
Size after Shrinkag(mm) |
Old packaging |
New packaging |
Range of Application
(mm) |
| Inter Diameter |
Wall Thickness |
Max Inter Diameter |
Wall Thickness |
Meter/Roll |
| Φ0.5 |
0.8±0.2 |
0.18±0.05 |
≤0.30 |
0.33±0.10 |
400 |
400 |
0.3~0.6 |
| Φ0.6 |
0.9±0.2 |
0.18±0.05 |
≤0.40 |
0.33±0.10 |
200 |
400 |
0.4~0.7 |
| Φ0.8 |
1.1±0.2 |
0.18±0.05 |
≤0.50 |
0.33±0.10 |
200 |
400 |
0.6~0.8 |
| Φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.65 |
0.36±0.10 |
200 |
400 |
0.75~0.9 |
| Φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.85 |
0.36±0.10 |
200 |
400 |
0.95~1.4 |
| Φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.00 |
0.45±0.10 |
200 |
400 |
1.1~1.8 |
| Φ2.5 |
3.0±0.2 |
0.20±0.05 |
≤1.30 |
0.45±0.10 |
200 |
400 |
1.35~2.3 |
| Φ3.0 |
3.5±0.2 |
0.20±0.05 |
≤1.50 |
0.45±0.10 |
200 |
400 |
1.6~2.7 |
| Φ3.5 |
4.0±0.2 |
0.23±0.05 |
≤1.80 |
0.45±0.10 |
200 |
400 |
1.85~3.2 |
| Φ4.0 |
4.7±0.2 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
400 |
2.1~3.6 |
| Φ4.5 |
5.0±0.2 |
0.28±0.05 |
≤2.30 |
0.56±0.10 |
100 |
200 |
2.35~4.0 |
| Φ5.0 |
5.5±0.2 |
0.28±0.05 |
≤2.50 |
0.56±0.10 |
100 |
200 |
2.6~4.5 |
| Φ5.5 |
6.0±0.2 |
0.28±0.05 |
≤2.80 |
0.56±0.10 |
100 |
200 |
2.9~5.0 |
| Φ6.0 |
6.5±0.2 |
0.28±0.05 |
≤3.00 |
0.56±0.10 |
100 |
200 |
3.1~5.4 |
| Φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.50 |
0.56±0.10 |
100 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.3 |
0.30±0.05 |
≤4.00 |
0.56±0.10 |
100 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.3 |
0.30±0.08 |
≤4.50 |
0.56±0.10 |
100 |
100 |
4.7~8.0 |
| Φ10 |
10.5±0.3 |
0.30±0.08 |
≤5.00 |
0.56±0.10 |
100 |
100 |
5.2~9.0 |
| Φ11 |
11.5±0.3 |
0.30±0.08 |
≤5.50 |
0.56±0.10 |
100 |
100 |
5.7~10 |
| Φ12 |
12.5±0.3 |
0.30±0.08 |
≤6.00 |
0.56±0.10 |
100 |
100 |
6.2~11 |
| Φ13 |
13.5±0.3 |
0.35±0.10 |
≤6.50 |
0.56±0.10 |
100 |
100 |
6.7~12 |
| Φ14 |
14.5±0.3 |
0.35±0.10 |
≤7.00 |
0.70±0.10 |
100 |
100 |
7.3~13 |
| Φ15 |
15.5±0.4 |
0.35±0.10 |
≤7.50 |
0.70±0.10 |
100 |
100 |
7.8~14 |
| Φ16 |
16.5±0.4 |
0.35±0.10 |
≤8.00 |
0.70±0.10 |
100 |
100 |
8.3~15 |
| Φ17 |
17.5±0.4 |
0.35±0.10 |
≤8.50 |
0.70±0.10 |
100 |
100 |
8.8~16 |
| Φ18 |
19.0±0.5 |
0.35±0.10 |
≤9.00 |
0.70±0.10 |
100 |
100 |
9.3~17 |
| Φ20 |
22.0±0.5 |
0.40±0.12 |
≤10.00 |
0.83±0.15 |
100 |
100 |
10.4~19 |
| Φ22 |
24.0±0.5 |
0.40±0.12 |
≤11.00 |
0.83±0.15 |
100 |
100 |
11.4~21 |
| Φ25 |
26.0±0.5 |
0.45±0.12 |
≤12.50 |
0.90±0.15 |
50 |
50 |
12.8~24 |
| Φ28 |
29.0±0.5 |
0.45±0.12 |
≤14.00 |
0.90±0.15 |
50 |
50 |
14.4~29 |
| Φ30 |
31.5±1.0 |
0.45±0.12 |
≤15.00 |
1.00±0.15 |
50 |
50 |
16~29 |
| Φ35 |
36.5±1.0 |
0.45±0.12 |
≤17.50 |
1.00±0.15 |
50 |
50 |
18~34 |
| Φ40 |
41.5±1.0 |
0.50±0.15 |
≤20.00 |
1.00±0.15 |
50 |
50 |
21~39 |
| Φ45 |
46.5±1.0 |
0.50±0.15 |
≤22.5 |
1.00±0.20 |
25 |
25 |
23.5~44 |
| Φ50 |
≥50 |
0.50±0.15 |
≤25.0 |
1.00±0.20 |
25 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30.0 |
1.30±0.25 |
25 |
25 |
35-55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤36.0 |
1.30±0.25 |
25 |
25 |
40-65 |
| Φ80 |
≥80 |
0.70±0.18 |
≤41.0 |
1.46±0.30 |
25 |
25 |
45-75 |
| Φ90 |
≥90 |
0.70±0.18 |
≤46.0 |
1.46±0.30 |
25 |
25 |
50-88 |
Note: Φ30 and above specification products default to G tube (environmental performance in line with EU RoHS2.0(2011/65/EU standard).
1. Operating Conditions
1.1 The ambient temperature for continuous use: -55°C to 125°C.
1.2 It can be used for a long time under acidic and alkaline conditions.
1.3 It can be used for a long time under strict environmental protection requirements.
2. Appearance Requirements
2.1 There are no obvious scratches, unevenness, or bamboo-joint-like defects on the surface of the product.
2.2 The surface is smooth, free of oil stains and dust accumulation.
2.3 The printing is clear, without ghosting, excess ink, incomplete printing, or slipping.
3. Heat Shrinkage Performance
3.1 The initial shrinkage temperature is 70°C; the full shrinkage temperature is 125°C.
In accordance with the UL224 standard, the full-shrinkage temperature is 200°C for 3 minutes.
3.2 The longitudinal shrinkage rate does not exceed ±5%.
4. Performance Characteristics of Materials
The physical and chemical properties of the materials comply with the provisions in Table 1.
The product dimensions of halogen-free flame-retardant thin-wall heat-shrinkable sleeves comply with the provisions in Table 2.
The product dimensions of halogen-free flame-retardant heat-shrinkable sleeves comply with the provisions in Table 3.
Standard colors: black, red, blue, yellow, green, white. Other colors such as purple, gray, brown, etc. can be customized according to customer requirements.
To achieve optimal results during usage, it is paramount to ensure that the heat-shrinkable sleeve attains its full potential. A forced-air constant-temperature oven is essential for this task, maintaining a precise shrinkage temperature of 125°C. Be vigilant, as inserting the sleeve into the oven can cause an initial drop in temperature, necessitating some time to stabilize at the desired setting. Additionally, the sleeve requires adequate duration for the hot air circulation to effectively bring it to full shrinkage. Thus, only when the oven's actual temperature reaches and maintains the set point for approximately 3 minutes can the sleeve shrink completely and correctly.
8. Application Field
8.1 Designed to provide supreme insulation protection for the internal wiring of electronic devices.
8.2 Insulation protection for electronics internal wiring
8.3 Offers excellent waterproof and dust-proof capabilities for safeguarding communication cables.
8.4 Ensures reliable protection and longevity for household wire connections.
8.5 Versatile materials perfect for crafting unique DIY jewelry pieces.
Company Profile
Dongguan Zhonghe Electronics Co., Ltd., a leader in innovative tech solutions, specializes in the cutting-edge development, production, and sales of polymer modified protective materials, offering comprehensive one-stop solutions. Established in 2010, our headquarters are strategically located in Qingxi Town, Dongguan City. Expanding our horizons, we launched a branch factory in Jiangsu in 2020, boasting a sprawling construction area exceeding 15,000 square meters.
Our business philosophy mirrors our name: Unity and win-win cooperation. At Dongguan Zhonghe Electronics, every employee is dedicated to our mission of 'escorting the Internet of Things,' passionately creating value and joy for our customers. We warmly welcome both domestic and international clients to visit us for fruitful negotiations!
Proudly serving over 3,000 clients across 102 countries, Dongguan Zhonghe Electronics is a global force. Our protective sleeves, if laid end-to-end, would circle the earth three times, with over 60 million meters dedicated to the automotive industry annually. As a trusted long-term supplier to numerous automobile OEMs and prestigious global companies, we are committed to excellence and innovation.
Certifications
Zhonghe is proudly accredited with the prestigious ISO9001 and IATF16949 quality management system certifications, as well as the ISO14001 environmental management system certification. Our production management system utilizes the advanced MES system to guarantee unparalleled product consistency, achieving up to 5% less loss compared to industry standards. This is a testament to our relentless pursuit of excellence! Equipped with a dedicated R&D team and state-of-the-art laboratory, we hold 5 invention patents and 18 utility model patents. Our commitment to innovation ensures that we develop 3-5 cutting-edge products annually, tailored to meet and exceed our customers' ever-evolving needs.
Exhibition & Our Partners
Packaging & Shipping
01 : Why choose us? - Let us show you why we're the best choice for all your electronics needs!
A:1. With over 15 years of expertise in the industry, our experience speaks for itself!
2. Our robust research and development capacity, backed by a skilled technical team, allows us to tailor our products precisely to your requirements.
3. Our dedicated professional sales team is committed to providing unparalleled service, ensuring a seamless experience for you!
02 : What's the MOQ for your production? - We are flexible and adaptable to your needs.
A: Whether your order is big or small, we welcome all inquiries. Reach out to us for personalized details!
03: Can l expect to get the sample - Experience our quality firsthand.? How long can l expect to get it? - Delight in our prompt service.
A: Absolutely, free samples are available for testing. Expect delivery in approximately 4-6 days.
Shipment time varies based on distance and chosen courier services, ensuring efficient and timely arrival.
04 : Can you do the design for us? - Your vision, our creation.
A: Yes, as a professional manufacturer, we can craft custom designs that meet your specifications perfectly.
05 : What's your payment term? - Secure and straightforward transactions.
A: Payment terms are 30% T/T Deposit with the balance due before shipment, providing a smooth financial process.
06 : What's the list of certificates you hold? - Assurance of quality and compliance.
A: We hold an impressive array of certifications including IATF16949, RoHS, CE, EN45545 Test Report, and ELV Test report, ensuring top-notch standards and reliability.
){kind=link}