2:1 Heat Shrink Tubing for Electrical Cable Management
Heat shrink tube, also known as heat shrinkable tubing, is crafted from advanced polymer materials. It showcases an extraordinary capability to contract snugly around objects when heated. At Dongguan Zhonghe Electronics Co., Ltd, our heat shrink tubes are meticulously crafted using premier polyolefin, fluoroplastic, silicone rubber, and polyester. Each of these exceptional materials bestows unique and remarkable properties, empowering our heat shrink tubes to fulfill the varying and stringent requirements across numerous industries.
Table 1 Performance characteristics of HF Flame Retardant Heat Shrink Tube
| Property |
Testing Method |
Performance index |
| Physical property |
Tensile strength/MPa |
GB/T1040 |
≥10.4 |
|
| Elongation at break/% |
GB/T1040 |
≥200 |
|
| Tensile strength after thermal aging/MPa |
UL224;158ºC×168hr |
≥7.3 |
|
| Elongation at break after thermal aging/% |
UL224;158ºC×168hr |
≥100 |
|
| Heat shock resistance |
UL224;250ºC×4hr |
Not sticky, non-cracked |
|
| Cold bending resistance |
UL224;-30ºC×1hr |
non-cracked |
|
| Electrical performance |
Withstand voltage |
300V |
UL224 |
1500V,1min no breakdown |
|
| 600V |
UL224 |
2500V,1min no breakdown |
|
| Breakdown strength/KV/mm |
GB/T1408 |
≥15 |
|
| Volume resistivity/Ω•cm |
GB/T1410 |
≥1×1014 |
|
| Chemical property |
Copper stability |
UL224;158ºC×168hr |
PASS |
|
| Corrosion resistance |
UL224;158ºC×168hr |
PASS |
|
| Flame retardancy |
UL224 |
☆ |
|
Note: ☆ highlights areas where flame retardant performance in yellow and white requires enhancement; the transparent heat shrink tube is not flame retardant.
Table 2 Product Dimensions of H-CB Tube
(HF Flame Retardant Thin Wall Heat Shrinkable Tube)
Size
(mm) |
Preshrink Size(mm) |
Size after Shrinkag(mm) |
Pack |
Range of Application (mm) |
| Inter Diameter |
Wall Thickness |
Inter Diameter |
Wall Thickness |
| Φ0.6CB |
0.9±0.2 |
0.13±0.05 |
≤0.40 |
0.20±0.10 |
200 |
0.4~0.7 |
| Φ0.8CB |
1.1±0.2 |
0.13±0.05 |
≤0.50 |
0.20±0.10 |
200 |
0.6~0.8 |
| Φ1.0CB |
1.40±0.2 |
0.13±0.05 |
≤0.65 |
0.20±0.10 |
200 |
0.7~1.0 |
| Φ1.5CB |
1.90±0.2 |
0.13±0.05 |
≤0.85 |
0.20±0.10 |
200 |
0.9~1.4 |
| Φ2.0CB |
2.40±0.2 |
0.13±0.05 |
≤1.00 |
0.22±0.10 |
200 |
1.1~1.8 |
| Φ2.5CB |
2.90±0.2 |
0.13±0.05 |
≤1.30 |
0.25±0.10 |
200 |
1.4~2.3 |
| Φ3.0CB |
3.40±0.2 |
0.13±0.05 |
≤1.50 |
0.28±0.10 |
200 |
1.6~2.7 |
| Φ3.5CB |
3.90±0.2 |
0.13±0.05 |
≤1.80 |
0.28±0.10 |
200 |
1.9~3.2 |
| Φ4.0CB |
4.40±0.2 |
0.15±0.05 |
≤2.00 |
0.30±0.10 |
200 |
2.1~3.6 |
| Φ4.5CB |
4.90±0.2 |
0.15±0.05 |
≤2.30 |
0.30±0.10 |
100 |
2.4~4.0 |
| Φ5.0CB |
5.50±0.2 |
0.15±0.05 |
≤2.5 |
0.32±0.10 |
100 |
2.6~4.5 |
| Φ6.0CB |
6.50±0.2 |
0.15±0.05 |
≤3.0 |
0.32±0.10 |
100 |
3.1~5.4 |
| Φ7CB |
7.50±0.3 |
0.15±0.05 |
≤3.5 |
0.32±0.10 |
200 |
3.7~6.3 |
| Φ8CB |
8.50±0.3 |
0.15±0.05 |
≤4.0 |
0.32±0.10 |
200 |
4.2~7.2 |
| Φ9CB |
9.50±0.3 |
0.15±0.05 |
≤4.5 |
0.35±0.10 |
200 |
4.7~8.0 |
| Φ10CB |
10.5±0.3 |
0.15±0.05 |
≤5.0 |
0.35±0.10 |
200 |
5.2~9.0 |
| Φ11CB |
11.5±0.3 |
0.18±0.05 |
≤5.5 |
0.40±0.10 |
200 |
5.7~10.0 |
| Φ12CB |
12.5±0.3 |
0.20±0.05 |
≤6.0 |
0.40±0.10 |
200 |
6.2~11.0 |
| Φ13CB |
13.5±0.3 |
0.20±0.05 |
≤6.5 |
0.40±0.10 |
200 |
6.7~12.0 |
| Φ14CB |
14.5±0.3 |
0.20±0.05 |
≤7.0 |
0.40±0.10 |
200 |
7.3~13.0 |
| Φ15CB |
15.5±0.4 |
0.20±0.05 |
≤7.5 |
0.40±0.10 |
200 |
7.8~14.0 |
| Φ16CB |
16.5±0.4 |
0.22±0.05 |
≤8.0 |
0.40±0.10 |
200 |
8.3~15.0 |
| Φ17CB |
17.5±0.4 |
0.22±0.05 |
≤8.5 |
0.40±0.10 |
200 |
8.8~16.0 |
| Φ18CB |
18.5±0.4 |
0.22±0.05 |
≤9.0 |
0.42±0.10 |
200 |
9.3~17.0 |
| Φ20CB |
20.5±0.5 |
0.25±0.05 |
≤10.0 |
0.45±0.10 |
200 |
10.5~19.0 |
| Φ22CB |
22.5±0.5 |
0.25±0.05 |
≤11.0 |
0.45±0.10 |
200 |
11.5~20.5 |
| Φ25CB |
25.5±0.5 |
0.25±0.05 |
≤12.5 |
0.45±0.10 |
100 |
13.0~24.0 |
| Φ28CB |
28.5±0.5 |
0.30±0.08 |
≤14.0 |
0.60±0.10 |
100 |
14.5~27.0 |
Table 3 Product Dimensions for H tube (HF Flame Retardant Heat Shrink Tube)
Size
(mm) |
Preshrink Size
(mm) |
Size after Shrinkag(mm) |
Old packaging |
New packaging |
Range of Application
(mm) |
| Inter Diameter |
Wall Thickness |
Max Inter Diameter |
Wall Thickness |
Meter/Roll |
| Φ0.5 |
0.8±0.2 |
0.18±0.05 |
≤0.30 |
0.33±0.10 |
400 |
400 |
0.3~0.6 |
| Φ0.6 |
0.9±0.2 |
0.18±0.05 |
≤0.40 |
0.33±0.10 |
200 |
400 |
0.4~0.7 |
| Φ0.8 |
1.1±0.2 |
0.18±0.05 |
≤0.50 |
0.33±0.10 |
200 |
400 |
0.6~0.8 |
| Φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.65 |
0.36±0.10 |
200 |
400 |
0.75~0.9 |
| Φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.85 |
0.36±0.10 |
200 |
400 |
0.95~1.4 |
| Φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.00 |
0.45±0.10 |
200 |
400 |
1.1~1.8 |
| Φ2.5 |
3.0±0.2 |
0.20±0.05 |
≤1.30 |
0.45±0.10 |
200 |
400 |
1.35~2.3 |
| Φ3.0 |
3.5±0.2 |
0.20±0.05 |
≤1.50 |
0.45±0.10 |
200 |
400 |
1.6~2.7 |
| Φ3.5 |
4.0±0.2 |
0.23±0.05 |
≤1.80 |
0.45±0.10 |
200 |
400 |
1.85~3.2 |
| Φ4.0 |
4.7±0.2 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
400 |
2.1~3.6 |
| Φ4.5 |
5.0±0.2 |
0.28±0.05 |
≤2.30 |
0.56±0.10 |
100 |
200 |
2.35~4.0 |
| Φ5.0 |
5.5±0.2 |
0.28±0.05 |
≤2.50 |
0.56±0.10 |
100 |
200 |
2.6~4.5 |
| Φ5.5 |
6.0±0.2 |
0.28±0.05 |
≤2.80 |
0.56±0.10 |
100 |
200 |
2.9~5.0 |
| Φ6.0 |
6.5±0.2 |
0.28±0.05 |
≤3.00 |
0.56±0.10 |
100 |
200 |
3.1~5.4 |
| Φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.50 |
0.56±0.10 |
100 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.3 |
0.30±0.05 |
≤4.00 |
0.56±0.10 |
100 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.3 |
0.30±0.08 |
≤4.50 |
0.56±0.10 |
100 |
100 |
4.7~8.0 |
| Φ10 |
10.5±0.3 |
0.30±0.08 |
≤5.00 |
0.56±0.10 |
100 |
100 |
5.2~9.0 |
| Φ11 |
11.5±0.3 |
0.30±0.08 |
≤5.50 |
0.56±0.10 |
100 |
100 |
5.7~10 |
| Φ12 |
12.5±0.3 |
0.30±0.08 |
≤6.00 |
0.56±0.10 |
100 |
100 |
6.2~11 |
| Φ13 |
13.5±0.3 |
0.35±0.10 |
≤6.50 |
0.56±0.10 |
100 |
100 |
6.7~12 |
| Φ14 |
14.5±0.3 |
0.35±0.10 |
≤7.00 |
0.70±0.10 |
100 |
100 |
7.3~13 |
| Φ15 |
15.5±0.4 |
0.35±0.10 |
≤7.50 |
0.70±0.10 |
100 |
100 |
7.8~14 |
| Φ16 |
16.5±0.4 |
0.35±0.10 |
≤8.00 |
0.70±0.10 |
100 |
100 |
8.3~15 |
| Φ17 |
17.5±0.4 |
0.35±0.10 |
≤8.50 |
0.70±0.10 |
100 |
100 |
8.8~16 |
| Φ18 |
19.0±0.5 |
0.35±0.10 |
≤9.00 |
0.70±0.10 |
100 |
100 |
9.3~17 |
| Φ20 |
22.0±0.5 |
0.40±0.12 |
≤10.00 |
0.83±0.15 |
100 |
100 |
10.4~19 |
| Φ22 |
24.0±0.5 |
0.40±0.12 |
≤11.00 |
0.83±0.15 |
100 |
100 |
11.4~21 |
| Φ25 |
26.0±0.5 |
0.45±0.12 |
≤12.50 |
0.90±0.15 |
50 |
50 |
12.8~24 |
| Φ28 |
29.0±0.5 |
0.45±0.12 |
≤14.00 |
0.90±0.15 |
50 |
50 |
14.4~29 |
| Φ30 |
31.5±1.0 |
0.45±0.12 |
≤15.00 |
1.00±0.15 |
50 |
50 |
16~29 |
| Φ35 |
36.5±1.0 |
0.45±0.12 |
≤17.50 |
1.00±0.15 |
50 |
50 |
18~34 |
| Φ40 |
41.5±1.0 |
0.50±0.15 |
≤20.00 |
1.00±0.15 |
50 |
50 |
21~39 |
| Φ45 |
46.5±1.0 |
0.50±0.15 |
≤22.5 |
1.00±0.20 |
25 |
25 |
23.5~44 |
| Φ50 |
≥50 |
0.50±0.15 |
≤25.0 |
1.00±0.20 |
25 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30.0 |
1.30±0.25 |
25 |
25 |
35-55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤36.0 |
1.30±0.25 |
25 |
25 |
40-65 |
| Φ80 |
≥80 |
0.70±0.18 |
≤41.0 |
1.46±0.30 |
25 |
25 |
45-75 |
| Φ90 |
≥90 |
0.70±0.18 |
≤46.0 |
1.46±0.30 |
25 |
25 |
50-88 |
Note: Φ30 and above specification products default to G tube (compliant with EU RoHS2.0(2011/65/EU) standard for environmental performance).
1. Operating Conditions
1.1 The ambient temperature suitable for continuous use spans -55°C to 125°C.
1.2 Successfully endures prolonged exposure to acidic and alkaline conditions.
1.3 Capable of sustained performance under rigorous environmental protection standards.
2. Appearance Requirements
2.1 The product's surface must be free from noticeable scratches, unevenness, or bamboo joint-like defects.
2.2 A smooth, pristine surface without oil stains or dust accumulation is required.
2.3 Printing must be sharp and clear, devoid of ghosting, excess ink, incomplete prints, or slippage.
3. Heat Shrinkage Performance
3.1 Initial shrinkage begins at 70°C, reaching full shrinkage at 125°C.
Complying with the UL224 standard, the full shrinkage temperature sustains at 200°C for 3 minutes.
3.2 The longitudinal shrinkage rate does not surpass ±5%.
4. Performance Characteristics of Materials
The materials' physical and chemical properties adhere to the specifications outlined in Table 1.
Dimensions of halogen-free flame-retardant thin-wall heat-shrinkable sleeves meet the criteria in Table 2.
Dimensions of halogen-free flame-retardant heat-shrinkable sleeves align with the details in Table 3.
Standard color options include black, red, blue, yellow, green, and white. Additional hues such as purple, gray, and brown are available for customization to meet customer specifications.
To guarantee the immaculate shrinkage of the heat-shrinkable sleeve during its application, it is imperative to utilize a forced-air constant-temperature oven, maintaining the shrinkage temperature meticulously at 125°C. It's crucial to note that upon inserting the heat-shrinkable sleeve into the oven, the temperature may initially dip and will require some time to stabilize back to the set temperature. The sleeve must also be given sufficient time to reach the targeted shrinkage temperature through the oven's circulating hot air. Therefore, the sleeve achieves its optimal shrink state when the oven's actual temperature attains and steadies at the specified 125°C for approximately 3 minutes, ensuring perfect insulation and protection.
8. Vast Application Fields
8.1 Primary Use Essential insulation protection for internal electronics wiring, safeguarding the integrity of sensitive components.
8.2 Insulation protection for electronics internal wiring
8.3 Robust waterproof and dust-proof shield for communication cables, enhancing durability and performance.
8.4 Reliable protection for household wire connections, ensuring safety and efficiency in domestic wiring systems.
8.5 Versatile materials for creative DIY jewelry making, opening a world of innovative crafting possibilities.
Company Profile
Dongguan Zhonghe Electronics Co., Ltd. is a forward-thinking and innovative enterprise specializing in the development, production, and sales of cutting-edge polymer-modified protective materials. Our company provides comprehensive one-stop solutions that meet diverse industry needs. Established in 2010, we proudly operate from our headquarters in Qingxi Town, Dongguan City. In 2020, we expanded our operational footprint with a state-of-the-art branch factory in Jiangsu, boasting a sprawling construction area exceeding 15,000 square meters.
Embracing the spirit of our name, Dongguan Zhonghe Electronics Co., Ltd. thrives on a business philosophy centered around unity and mutually beneficial cooperation. Driven by our unwavering mission to 'escort the Internet of Things,' our dedicated team is committed to delivering unparalleled value and satisfaction to our clients. We warmly welcome both domestic and international customers to visit our premises for engaging negotiations and promising partnerships!
With an impressive presence spanning 102 countries worldwide, our company is proud to serve over 3,000 discerning clients. Our protective sleeves production is so extensive that annually, it could encircle the globe three times. Notably, over 60 million meters of our products are dedicated to the automotive industry, reinforcing our status as a trusted long-term supplier to major automobile OEMs and globally renowned corporations.
Certifications
Zhonghe has proudly earned prestigious certifications, passing the rigorous ISO9001, IATF16949 quality management system, as well as the environmentally conscious ISO14001 certification. Our production management system utilizes the state-of-the-art MES technology, guaranteeing exceptional product consistency while achieving a remarkable 5% lower loss compared to industry peers. Our dedicated professional R&D team, equipped with a cutting-edge laboratory, boasts 5 inventive patents and 18 utility model patents, continually innovating by developing 3-5 exciting new products every year to cater to diverse customer needs.
Exhibition & Our Partners
Packaging & Shipping
01 : Why choose us?
A:1. With over 15 years of unparalleled expertise in the industry, Dongguan Zhonghe Electronics Co., Ltd. stands as a beacon of innovation and quality!
2. Unmatched Research and Development Capacity - Our elite technical team is adept at crafting and designing products tailored precisely to your requirements!
3. Our highly professional sales team is dedicated to providing you with exceptional service, ensuring your needs are met with excellence!
02 : What's the MOQ for your production?
A: We cater to both large and small orders, ensuring flexibility. Please reach out to us for comprehensive details.
03: Can I expect to get the sample? How long can I expect to get it?
A: Absolutely, we offer complimentary samples for testing. Expect delivery in approximately 4-6 days.
Shipment times may vary based on distance and the chosen courier service.
04 : Can you do the design for us?
A: Yes, as a professional manufacturer, we're fully equipped to handle design solutions for you.
05 : What's your payment term?
A: We require a 30% T/T deposit with the balance payable prior to shipment.
06 : What's the list of certificates you hold?
A: We proudly hold certifications such as IATF16949, RoHS, CE, EN45545 Test Report, ELV Test Report.
Audited Supplier 
){kind=link}