| Customization: | Available |
|---|---|
| Certification: | ISO |
| Color: | Black,Orange,Red,Yellow, Transparent |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product description The 3:1, 4:1 double-walled pipe is composed of double-layer halogen-free flame-retardant polyolefin and hot melt adhesive. The outer polyolefin is made of insulating, halogen-free and flame-retardant material. The inner layer of hot melt adhesive can buffer mechanical strain and seal strong. The main functions are sealing, waterproof, anti-corrosion, anti-leakage, multi-strand wiring harness and insulation. It is mainly used in various wiring harnesses, marine wires and metal pipes that need to be sealed, insulated, bundled and fixed. Features The outer layer is flame-retardant, anti-ultraviolet, and wear-resistant Shrink ratio 3:1 Environmental protection standard RoHS REACH Color: black, orange, red, yellow, transparent, other colors can be customized
|
Outer technical instructions
|
||
|
Performance item
|
Instruct
|
Experiment Method
|
|
Tensile Strength
|
≥10.4MPa
|
ASTM D 2671
|
|
Elongation at break
|
≥300%
|
ASTM D 2671
|
|
Tensile strength after heat aging
|
≥8.4MPa
|
158°C x168h
|
|
Elongation at break after heat aging
|
≥100%
|
158°C x168h
|
|
Axial change rate
|
-8%~ 8%
|
ASTM D 2671
|
|
Flame retardant
|
Flame retardant VW-1 or GB2408-V0, self-extinguishing in 30 seconds
|
AMS-DTL-23053/5
|
|
Breakdown strength
|
≥15KV/mm
|
IEC 60243
|
|
Withstand voltage (rated voltage 600V)
|
2500V, 1min without breakdown
|
UL 224
|
|
Volume resistivity
|
21040.cm
|
IEC 60093
|
|
Hot melt adhesive technical instructions
|
||
|
Performance item
|
instruct
|
experiment method
|
|
Softening Point
|
85+3°C
|
ASTM E 28
|
|
Water absorption
|
≤0.2%
|
ASTM D 570
|
|
Peel strength (PE)
|
≥120N/25mm
|
ASTM D 1000
|
|
Peel strength (AL)
|
≥80N/25mm.
|
ASTM D 1000
|
){kind=link}