2:1 Heat Shrink Tube for auto wire harness
Heat shrink tube, also known as heat shrinkable tubing, is crafted from advanced polymer materials. Its most distinctive feature lies in its ability to tightly contract around the object it encases when exposed to heat. At Dongguan Zhonghe Electronics Co., Ltd, our heat shrink tubes are meticulously manufactured using top - tier polyolefin, fluoroplastic, silicone rubber, and polyester. Each material imparts unique and outstanding properties, enabling our heat shrink tubes to meet the diverse and exacting demands of different industries.
Table 1 Performance characteristics of HF Flame Retardant Heat Shrink Tube
| Property |
Testing Method |
Performance index |
| Physical property |
Tensile strength/MPa |
GB/T1040 |
≥10.4 |
|
| Elongation at break/% |
GB/T1040 |
≥200 |
|
| Tensile strength after thermal aging/MPa |
UL224;158ºC×168hr |
≥7.3 |
|
| Elongation at break after thermal aging/% |
UL224;158ºC×168hr |
≥100 |
|
| Heat shock resistance |
UL224;250ºC×4hr |
Not sticky, non-cracked |
|
| Cold bending resistance |
UL224;-30ºC×1hr |
non-cracked |
|
| Electrical performance |
Withstand voltage |
300V |
UL224 |
1500V,1min no breakdown |
|
| 600V |
UL224 |
2500V,1min no breakdown |
|
| Breakdown strength/KV/mm |
GB/T1408 |
≥15 |
|
| Volume resistivity/Ω•cm |
GB/T1410 |
≥1×1014 |
|
| Chemical property |
Copper stability |
UL224;158ºC×168hr |
PASS |
|
| Corrosion resistance |
UL224;158ºC×168hr |
PASS |
|
| Flame retardancy |
UL224 |
☆ |
|
Note: ☆ indicates that the flame retardant performance of yellow and white needs to be improved, and the transparent heat shrink tube is not flame retardant.
Table 2 Product Dimensions of H-CB Tube
(HF Flame Retardant Thin Wall Heat Shrinkable Tube)
Size
(mm) |
Preshrink Size(mm) |
Size after Shrinkag(mm) |
Pack |
Range of Application (mm) |
| Inter Diameter |
Wall Thickness |
Inter Diameter |
Wall Thickness |
| Φ0.6CB |
0.9±0.2 |
0.13±0.05 |
≤0.40 |
0.20±0.10 |
200 |
0.4~0.7 |
| Φ0.8CB |
1.1±0.2 |
0.13±0.05 |
≤0.50 |
0.20±0.10 |
200 |
0.6~0.8 |
| Φ1.0CB |
1.40±0.2 |
0.13±0.05 |
≤0.65 |
0.20±0.10 |
200 |
0.7~1.0 |
| Φ1.5CB |
1.90±0.2 |
0.13±0.05 |
≤0.85 |
0.20±0.10 |
200 |
0.9~1.4 |
| Φ2.0CB |
2.40±0.2 |
0.13±0.05 |
≤1.00 |
0.22±0.10 |
200 |
1.1~1.8 |
| Φ2.5CB |
2.90±0.2 |
0.13±0.05 |
≤1.30 |
0.25±0.10 |
200 |
1.4~2.3 |
| Φ3.0CB |
3.40±0.2 |
0.13±0.05 |
≤1.50 |
0.28±0.10 |
200 |
1.6~2.7 |
| Φ3.5CB |
3.90±0.2 |
0.13±0.05 |
≤1.80 |
0.28±0.10 |
200 |
1.9~3.2 |
| Φ4.0CB |
4.40±0.2 |
0.15±0.05 |
≤2.00 |
0.30±0.10 |
200 |
2.1~3.6 |
| Φ4.5CB |
4.90±0.2 |
0.15±0.05 |
≤2.30 |
0.30±0.10 |
100 |
2.4~4.0 |
| Φ5.0CB |
5.50±0.2 |
0.15±0.05 |
≤2.5 |
0.32±0.10 |
100 |
2.6~4.5 |
| Φ6.0CB |
6.50±0.2 |
0.15±0.05 |
≤3.0 |
0.32±0.10 |
100 |
3.1~5.4 |
| Φ7CB |
7.50±0.3 |
0.15±0.05 |
≤3.5 |
0.32±0.10 |
200 |
3.7~6.3 |
| Φ8CB |
8.50±0.3 |
0.15±0.05 |
≤4.0 |
0.32±0.10 |
200 |
4.2~7.2 |
| Φ9CB |
9.50±0.3 |
0.15±0.05 |
≤4.5 |
0.35±0.10 |
200 |
4.7~8.0 |
| Φ10CB |
10.5±0.3 |
0.15±0.05 |
≤5.0 |
0.35±0.10 |
200 |
5.2~9.0 |
| Φ11CB |
11.5±0.3 |
0.18±0.05 |
≤5.5 |
0.40±0.10 |
200 |
5.7~10.0 |
| Φ12CB |
12.5±0.3 |
0.20±0.05 |
≤6.0 |
0.40±0.10 |
200 |
6.2~11.0 |
| Φ13CB |
13.5±0.3 |
0.20±0.05 |
≤6.5 |
0.40±0.10 |
200 |
6.7~12.0 |
| Φ14CB |
14.5±0.3 |
0.20±0.05 |
≤7.0 |
0.40±0.10 |
200 |
7.3~13.0 |
| Φ15CB |
15.5±0.4 |
0.20±0.05 |
≤7.5 |
0.40±0.10 |
200 |
7.8~14.0 |
| Φ16CB |
16.5±0.4 |
0.22±0.05 |
≤8.0 |
0.40±0.10 |
200 |
8.3~15.0 |
| Φ17CB |
17.5±0.4 |
0.22±0.05 |
≤8.5 |
0.40±0.10 |
200 |
8.8~16.0 |
| Φ18CB |
18.5±0.4 |
0.22±0.05 |
≤9.0 |
0.42±0.10 |
200 |
9.3~17.0 |
| Φ20CB |
20.5±0.5 |
0.25±0.05 |
≤10.0 |
0.45±0.10 |
200 |
10.5~19.0 |
| Φ22CB |
22.5±0.5 |
0.25±0.05 |
≤11.0 |
0.45±0.10 |
200 |
11.5~20.5 |
| Φ25CB |
25.5±0.5 |
0.25±0.05 |
≤12.5 |
0.45±0.10 |
100 |
13.0~24.0 |
| Φ28CB |
28.5±0.5 |
0.30±0.08 |
≤14.0 |
0.60±0.10 |
100 |
14.5~27.0 |
Table 3 Product Dimensions for H tube (HF Flame Retardant Heat Shrink Tube)
Size
(mm) |
Preshrink Size
(mm) |
Size after Shrinkag(mm) |
Old packaging |
New packaging |
Range of Application
(mm) |
| Inter Diameter |
Wall Thickness |
Max Inter Diameter |
Wall Thickness |
Meter/Roll |
| Φ0.5 |
0.8±0.2 |
0.18±0.05 |
≤0.30 |
0.33±0.10 |
400 |
400 |
0.3~0.6 |
| Φ0.6 |
0.9±0.2 |
0.18±0.05 |
≤0.40 |
0.33±0.10 |
200 |
400 |
0.4~0.7 |
| Φ0.8 |
1.1±0.2 |
0.18±0.05 |
≤0.50 |
0.33±0.10 |
200 |
400 |
0.6~0.8 |
| Φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.65 |
0.36±0.10 |
200 |
400 |
0.75~0.9 |
| Φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.85 |
0.36±0.10 |
200 |
400 |
0.95~1.4 |
| Φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.00 |
0.45±0.10 |
200 |
400 |
1.1~1.8 |
| Φ2.5 |
3.0±0.2 |
0.20±0.05 |
≤1.30 |
0.45±0.10 |
200 |
400 |
1.35~2.3 |
| Φ3.0 |
3.5±0.2 |
0.20±0.05 |
≤1.50 |
0.45±0.10 |
200 |
400 |
1.6~2.7 |
| Φ3.5 |
4.0±0.2 |
0.23±0.05 |
≤1.80 |
0.45±0.10 |
200 |
400 |
1.85~3.2 |
| Φ4.0 |
4.7±0.2 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
400 |
2.1~3.6 |
| Φ4.5 |
5.0±0.2 |
0.28±0.05 |
≤2.30 |
0.56±0.10 |
100 |
200 |
2.35~4.0 |
| Φ5.0 |
5.5±0.2 |
0.28±0.05 |
≤2.50 |
0.56±0.10 |
100 |
200 |
2.6~4.5 |
| Φ5.5 |
6.0±0.2 |
0.28±0.05 |
≤2.80 |
0.56±0.10 |
100 |
200 |
2.9~5.0 |
| Φ6.0 |
6.5±0.2 |
0.28±0.05 |
≤3.00 |
0.56±0.10 |
100 |
200 |
3.1~5.4 |
| Φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.50 |
0.56±0.10 |
100 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.3 |
0.30±0.05 |
≤4.00 |
0.56±0.10 |
100 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.3 |
0.30±0.08 |
≤4.50 |
0.56±0.10 |
100 |
100 |
4.7~8.0 |
| Φ10 |
10.5±0.3 |
0.30±0.08 |
≤5.00 |
0.56±0.10 |
100 |
100 |
5.2~9.0 |
| Φ11 |
11.5±0.3 |
0.30±0.08 |
≤5.50 |
0.56±0.10 |
100 |
100 |
5.7~10 |
| Φ12 |
12.5±0.3 |
0.30±0.08 |
≤6.00 |
0.56±0.10 |
100 |
100 |
6.2~11 |
| Φ13 |
13.5±0.3 |
0.35±0.10 |
≤6.50 |
0.56±0.10 |
100 |
100 |
6.7~12 |
| Φ14 |
14.5±0.3 |
0.35±0.10 |
≤7.00 |
0.70±0.10 |
100 |
100 |
7.3~13 |
| Φ15 |
15.5±0.4 |
0.35±0.10 |
≤7.50 |
0.70±0.10 |
100 |
100 |
7.8~14 |
| Φ16 |
16.5±0.4 |
0.35±0.10 |
≤8.00 |
0.70±0.10 |
100 |
100 |
8.3~15 |
| Φ17 |
17.5±0.4 |
0.35±0.10 |
≤8.50 |
0.70±0.10 |
100 |
100 |
8.8~16 |
| Φ18 |
19.0±0.5 |
0.35±0.10 |
≤9.00 |
0.70±0.10 |
100 |
100 |
9.3~17 |
| Φ20 |
22.0±0.5 |
0.40±0.12 |
≤10.00 |
0.83±0.15 |
100 |
100 |
10.4~19 |
| Φ22 |
24.0±0.5 |
0.40±0.12 |
≤11.00 |
0.83±0.15 |
100 |
100 |
11.4~21 |
| Φ25 |
26.0±0.5 |
0.45±0.12 |
≤12.50 |
0.90±0.15 |
50 |
50 |
12.8~24 |
| Φ28 |
29.0±0.5 |
0.45±0.12 |
≤14.00 |
0.90±0.15 |
50 |
50 |
14.4~29 |
| Φ30 |
31.5±1.0 |
0.45±0.12 |
≤15.00 |
1.00±0.15 |
50 |
50 |
16~29 |
| Φ35 |
36.5±1.0 |
0.45±0.12 |
≤17.50 |
1.00±0.15 |
50 |
50 |
18~34 |
| Φ40 |
41.5±1.0 |
0.50±0.15 |
≤20.00 |
1.00±0.15 |
50 |
50 |
21~39 |
| Φ45 |
46.5±1.0 |
0.50±0.15 |
≤22.5 |
1.00±0.20 |
25 |
25 |
23.5~44 |
| Φ50 |
≥50 |
0.50±0.15 |
≤25.0 |
1.00±0.20 |
25 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30.0 |
1.30±0.25 |
25 |
25 |
35-55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤36.0 |
1.30±0.25 |
25 |
25 |
40-65 |
| Φ80 |
≥80 |
0.70±0.18 |
≤41.0 |
1.46±0.30 |
25 |
25 |
45-75 |
| Φ90 |
≥90 |
0.70±0.18 |
≤46.0 |
1.46±0.30 |
25 |
25 |
50-88 |
Note :Φ30 and above specification products default to G tube (environmental performance in line with EU RoHS2.0(2011/65/EU standard).
1. Operating Conditions
1.1 The ambient temperature for continuous use: -55°C to 125°C.
1.2 It can be used for a long time under acidic and alkaline conditions.
1.3 It can be used for a long time under strict environmental protection requirements.
2. Appearance Requirements
2.1 There are no obvious scratches, unevenness, or bamboo - joint - like defects on the surface of the product.
2.2 The surface is smooth, free of oil stains and dust accumulation.
2.3 The printing is clear, without ghosting, excess ink, incomplete printing, or slipping.
3. Heat Shrinkage Performance
3.1 The initial shrinkage temperature is 70°C; the full shrinkage temperature is 125°C.
In accordance with the UL224 standard, the full - shrinkage temperature is 200°C for 3 minutes.
3.2 The longitudinal shrinkage rate does not exceed ±5%.
4. Performance Characteristics of Materials
The physical and chemical properties of the materials comply with the provisions in Table 1.
The product dimensions of halogen - free flame - retardant thin - wall heat - shrinkable sleeves comply with the provisions in Table 2.
The product dimensions of halogen - free flame - retardant heat - shrinkable sleeves comply with the provisions in Table 3.
Standard colors: black, red, blue, yellow, green, white. Other colors such as purple, gray, brown, etc. can be customized according to customer requirements.
During the use process, in order to ensure that the heat - shrinkable sleeve can be fully shrunk in place, a forced - air - type constant - temperature oven should be used, and the shrinkage temperature should be controlled at 125°C. Pay special attention that when the heat - shrinkable sleeve is put into the oven, the oven temperature has a downward trend, and it takes a certain amount of time to reach the set temperature. At the same time, it also takes a certain amount of time for the heat - shrinkable sleeve to reach the final shrinkage temperature through the circulation of hot air in the oven. Therefore, the heat - shrinkable sleeve can be fully shrunk in place only when the actual temperature of the oven reaches the set temperature and remains at this temperature for about 3 minutes.
8. Application field
8.1 Insulation protection for electronics internal wiring
8.2 Insulation protection for electronics internal wiring
8.3 Waterproof and dust - proof for communication cables
8.4 Protection for household wire connections
8.5 Materials for DIY jewelry making
Company Profile
Dongguan Zhonghe Electronics Co., Ltd. is a specialized and innovative technology-based enterprise that specializes in the development, production and sales of polymer modified protective materials and provides one-stop solutions. It was founded in 2010 and is headquartered in Qingxi Town, Dongguan City.In 2020, a branch factory was established in Jiangsu with a construction area of more than 15, 000 square meters.
The company′s business philosophy is just like the company′s name: Unity and win-win cooperation. All employees adhere to the mission of "escorting the Internet of Things" and strive to create value and happiness for customers. Welcome domestic and foreign customers to visit our company for negotiation!
Currently, the company serves customers in 102 countries across the country and overseas, serving more than 3, 000 customers. The protective sleeves produced each year can circle the earth three times, of which more than 60 million meters are used in the automotive field. It is a long-term supplier of many automobile OEMs and world-renowned companies.
Certifications
Zhonghe has passed ISO9001, IATF16949 quality management system and ISO14001 environmental management system certification. The production management adopts the MES system to ensure product consistency, and the loss is 5% lower than that of the same industry. The company has a professional R&D team and laboratory, 5 invention patents, 18 utility model patents, and develops 3-5 new products every year to meet customer needs.
Exhibition & Our Partners
Packaging & Shipping
FAQ
01 : Why choose us?
A:1.We have more than 15 years of experience in this industry!
2.Research and development capacity- We have one of technical team who can develop and design the product according to the requirements of customers!
3.We have a professional sales team to provide excellent service for you!
02 : What's the MOQ for your production?
A: We accept both large and small order, please contact us for details.
03: Can l expect to get the sample? How long can l expect to get it?
A: Sure, Free samples can sent to you for test. About 4-6 days.
Shipment according to distance and courier company.
04 : Can you do the design for us?
A: Yes, We are a professional manufacturer who can design for you.
05 : What's your payment term?
A: 30% T/T Deposit +Balance before Shipment.
06 : What's the list of certificates you hold?
A:IATF16949, RoHS, CE, EN45545 Test Report, ELV Test report.
){kind=link}