2:1 Heat Shrink Tubing for Comprehensive Electrical Cable Management
Heat shrink tube, also known as heat shrinkable tubing, is expertly crafted from advanced polymer materials. Its most remarkable feature is its ability to securely contract around the encased object upon exposure to heat. At Dongguan Zhonghe Electronics Co., Ltd, our heat shrink tubes are meticulously engineered using premium polyolefin, fluoroplastic, silicone rubber, and polyester. Each of these materials imparts distinct and exceptional properties, enabling our heat shrink tubes to fulfill the varied and stringent demands across different industries.
Table 1: Performance Characteristics of HF Flame Retardant Heat Shrink Tube
| Property |
Testing Method |
Performance index |
| Physical property |
Tensile strength/MPa |
GB/T1040 |
≥10.4 |
|
| Elongation at break/% |
GB/T1040 |
≥200 |
|
| Tensile strength after thermal aging/MPa |
UL224;158ºC×168hr |
≥7.3 |
|
| Elongation at break after thermal aging/% |
UL224;158ºC×168hr |
≥100 |
|
| Heat shock resistance |
UL224;250ºC×4hr |
Not sticky, non-cracked |
|
| Cold bending resistance |
UL224;-30ºC×1hr |
non-cracked |
|
| Electrical performance |
Withstand voltage |
300V |
UL224 |
1500V,1min no breakdown |
|
| 600V |
UL224 |
2500V,1min no breakdown |
|
| Breakdown strength/KV/mm |
GB/T1408 |
≥15 |
|
| Volume resistivity/Ω•cm |
GB/T1410 |
≥1×1014 |
|
| Chemical property |
Copper stability |
UL224;158ºC×168hr |
PASS |
|
| Corrosion resistance |
UL224;158ºC×168hr |
PASS |
|
| Flame retardancy |
UL224 |
☆ |
|
Note: ☆ denotes that the flame retardant performance of yellow and white colors requires enhancement, and the transparent heat shrink tube lacks flame retardancy.
Table 2: Product Dimensions of H-CB Tube
(HF Flame Retardant Thin Wall Heat Shrinkable Tube)
Size
(mm) |
Preshrink Size(mm) |
Size after Shrinkag(mm) |
Pack |
Range of Application (mm) |
| Inter Diameter |
Wall Thickness |
Inter Diameter |
Wall Thickness |
| Φ0.6CB |
0.9±0.2 |
0.13±0.05 |
≤0.40 |
0.20±0.10 |
200 |
0.4~0.7 |
| Φ0.8CB |
1.1±0.2 |
0.13±0.05 |
≤0.50 |
0.20±0.10 |
200 |
0.6~0.8 |
| Φ1.0CB |
1.40±0.2 |
0.13±0.05 |
≤0.65 |
0.20±0.10 |
200 |
0.7~1.0 |
| Φ1.5CB |
1.90±0.2 |
0.13±0.05 |
≤0.85 |
0.20±0.10 |
200 |
0.9~1.4 |
| Φ2.0CB |
2.40±0.2 |
0.13±0.05 |
≤1.00 |
0.22±0.10 |
200 |
1.1~1.8 |
| Φ2.5CB |
2.90±0.2 |
0.13±0.05 |
≤1.30 |
0.25±0.10 |
200 |
1.4~2.3 |
| Φ3.0CB |
3.40±0.2 |
0.13±0.05 |
≤1.50 |
0.28±0.10 |
200 |
1.6~2.7 |
| Φ3.5CB |
3.90±0.2 |
0.13±0.05 |
≤1.80 |
0.28±0.10 |
200 |
1.9~3.2 |
| Φ4.0CB |
4.40±0.2 |
0.15±0.05 |
≤2.00 |
0.30±0.10 |
200 |
2.1~3.6 |
| Φ4.5CB |
4.90±0.2 |
0.15±0.05 |
≤2.30 |
0.30±0.10 |
100 |
2.4~4.0 |
| Φ5.0CB |
5.50±0.2 |
0.15±0.05 |
≤2.5 |
0.32±0.10 |
100 |
2.6~4.5 |
| Φ6.0CB |
6.50±0.2 |
0.15±0.05 |
≤3.0 |
0.32±0.10 |
100 |
3.1~5.4 |
| Φ7CB |
7.50±0.3 |
0.15±0.05 |
≤3.5 |
0.32±0.10 |
200 |
3.7~6.3 |
| Φ8CB |
8.50±0.3 |
0.15±0.05 |
≤4.0 |
0.32±0.10 |
200 |
4.2~7.2 |
| Φ9CB |
9.50±0.3 |
0.15±0.05 |
≤4.5 |
0.35±0.10 |
200 |
4.7~8.0 |
| Φ10CB |
10.5±0.3 |
0.15±0.05 |
≤5.0 |
0.35±0.10 |
200 |
5.2~9.0 |
| Φ11CB |
11.5±0.3 |
0.18±0.05 |
≤5.5 |
0.40±0.10 |
200 |
5.7~10.0 |
| Φ12CB |
12.5±0.3 |
0.20±0.05 |
≤6.0 |
0.40±0.10 |
200 |
6.2~11.0 |
| Φ13CB |
13.5±0.3 |
0.20±0.05 |
≤6.5 |
0.40±0.10 |
200 |
6.7~12.0 |
| Φ14CB |
14.5±0.3 |
0.20±0.05 |
≤7.0 |
0.40±0.10 |
200 |
7.3~13.0 |
| Φ15CB |
15.5±0.4 |
0.20±0.05 |
≤7.5 |
0.40±0.10 |
200 |
7.8~14.0 |
| Φ16CB |
16.5±0.4 |
0.22±0.05 |
≤8.0 |
0.40±0.10 |
200 |
8.3~15.0 |
| Φ17CB |
17.5±0.4 |
0.22±0.05 |
≤8.5 |
0.40±0.10 |
200 |
8.8~16.0 |
| Φ18CB |
18.5±0.4 |
0.22±0.05 |
≤9.0 |
0.42±0.10 |
200 |
9.3~17.0 |
| Φ20CB |
20.5±0.5 |
0.25±0.05 |
≤10.0 |
0.45±0.10 |
200 |
10.5~19.0 |
| Φ22CB |
22.5±0.5 |
0.25±0.05 |
≤11.0 |
0.45±0.10 |
200 |
11.5~20.5 |
| Φ25CB |
25.5±0.5 |
0.25±0.05 |
≤12.5 |
0.45±0.10 |
100 |
13.0~24.0 |
| Φ28CB |
28.5±0.5 |
0.30±0.08 |
≤14.0 |
0.60±0.10 |
100 |
14.5~27.0 |
Table 3 Product Dimensions for H Tube (HF Flame Retardant Heat Shrink Tube)
Size
(mm) |
Preshrink Size
(mm) |
Size after Shrinkag(mm) |
Old packaging |
New packaging |
Range of Application
(mm) |
| Inter Diameter |
Wall Thickness |
Max Inter Diameter |
Wall Thickness |
Meter/Roll |
| Φ0.5 |
0.8±0.2 |
0.18±0.05 |
≤0.30 |
0.33±0.10 |
400 |
400 |
0.3~0.6 |
| Φ0.6 |
0.9±0.2 |
0.18±0.05 |
≤0.40 |
0.33±0.10 |
200 |
400 |
0.4~0.7 |
| Φ0.8 |
1.1±0.2 |
0.18±0.05 |
≤0.50 |
0.33±0.10 |
200 |
400 |
0.6~0.8 |
| Φ1.0 |
1.5±0.2 |
0.20±0.05 |
≤0.65 |
0.36±0.10 |
200 |
400 |
0.75~0.9 |
| Φ1.5 |
2.0±0.2 |
0.20±0.05 |
≤0.85 |
0.36±0.10 |
200 |
400 |
0.95~1.4 |
| Φ2.0 |
2.5±0.2 |
0.20±0.05 |
≤1.00 |
0.45±0.10 |
200 |
400 |
1.1~1.8 |
| Φ2.5 |
3.0±0.2 |
0.20±0.05 |
≤1.30 |
0.45±0.10 |
200 |
400 |
1.35~2.3 |
| Φ3.0 |
3.5±0.2 |
0.20±0.05 |
≤1.50 |
0.45±0.10 |
200 |
400 |
1.6~2.7 |
| Φ3.5 |
4.0±0.2 |
0.23±0.05 |
≤1.80 |
0.45±0.10 |
200 |
400 |
1.85~3.2 |
| Φ4.0 |
4.7±0.2 |
0.25±0.05 |
≤2.00 |
0.45±0.10 |
200 |
400 |
2.1~3.6 |
| Φ4.5 |
5.0±0.2 |
0.28±0.05 |
≤2.30 |
0.56±0.10 |
100 |
200 |
2.35~4.0 |
| Φ5.0 |
5.5±0.2 |
0.28±0.05 |
≤2.50 |
0.56±0.10 |
100 |
200 |
2.6~4.5 |
| Φ5.5 |
6.0±0.2 |
0.28±0.05 |
≤2.80 |
0.56±0.10 |
100 |
200 |
2.9~5.0 |
| Φ6.0 |
6.5±0.2 |
0.28±0.05 |
≤3.00 |
0.56±0.10 |
100 |
200 |
3.1~5.4 |
| Φ7.0 |
7.5±0.3 |
0.30±0.05 |
≤3.50 |
0.56±0.10 |
100 |
100 |
3.7~6.3 |
| Φ8.0 |
8.5±0.3 |
0.30±0.05 |
≤4.00 |
0.56±0.10 |
100 |
100 |
4.2~7.2 |
| Φ9.0 |
9.5±0.3 |
0.30±0.08 |
≤4.50 |
0.56±0.10 |
100 |
100 |
4.7~8.0 |
| Φ10 |
10.5±0.3 |
0.30±0.08 |
≤5.00 |
0.56±0.10 |
100 |
100 |
5.2~9.0 |
| Φ11 |
11.5±0.3 |
0.30±0.08 |
≤5.50 |
0.56±0.10 |
100 |
100 |
5.7~10 |
| Φ12 |
12.5±0.3 |
0.30±0.08 |
≤6.00 |
0.56±0.10 |
100 |
100 |
6.2~11 |
| Φ13 |
13.5±0.3 |
0.35±0.10 |
≤6.50 |
0.56±0.10 |
100 |
100 |
6.7~12 |
| Φ14 |
14.5±0.3 |
0.35±0.10 |
≤7.00 |
0.70±0.10 |
100 |
100 |
7.3~13 |
| Φ15 |
15.5±0.4 |
0.35±0.10 |
≤7.50 |
0.70±0.10 |
100 |
100 |
7.8~14 |
| Φ16 |
16.5±0.4 |
0.35±0.10 |
≤8.00 |
0.70±0.10 |
100 |
100 |
8.3~15 |
| Φ17 |
17.5±0.4 |
0.35±0.10 |
≤8.50 |
0.70±0.10 |
100 |
100 |
8.8~16 |
| Φ18 |
19.0±0.5 |
0.35±0.10 |
≤9.00 |
0.70±0.10 |
100 |
100 |
9.3~17 |
| Φ20 |
22.0±0.5 |
0.40±0.12 |
≤10.00 |
0.83±0.15 |
100 |
100 |
10.4~19 |
| Φ22 |
24.0±0.5 |
0.40±0.12 |
≤11.00 |
0.83±0.15 |
100 |
100 |
11.4~21 |
| Φ25 |
26.0±0.5 |
0.45±0.12 |
≤12.50 |
0.90±0.15 |
50 |
50 |
12.8~24 |
| Φ28 |
29.0±0.5 |
0.45±0.12 |
≤14.00 |
0.90±0.15 |
50 |
50 |
14.4~29 |
| Φ30 |
31.5±1.0 |
0.45±0.12 |
≤15.00 |
1.00±0.15 |
50 |
50 |
16~29 |
| Φ35 |
36.5±1.0 |
0.45±0.12 |
≤17.50 |
1.00±0.15 |
50 |
50 |
18~34 |
| Φ40 |
41.5±1.0 |
0.50±0.15 |
≤20.00 |
1.00±0.15 |
50 |
50 |
21~39 |
| Φ45 |
46.5±1.0 |
0.50±0.15 |
≤22.5 |
1.00±0.20 |
25 |
25 |
23.5~44 |
| Φ50 |
≥50 |
0.50±0.15 |
≤25.0 |
1.00±0.20 |
25 |
25 |
26~49 |
| Φ60 |
≥60 |
0.60±0.15 |
≤30.0 |
1.30±0.25 |
25 |
25 |
35-55 |
| Φ70 |
≥70 |
0.65±0.15 |
≤36.0 |
1.30±0.25 |
25 |
25 |
40-65 |
| Φ80 |
≥80 |
0.70±0.18 |
≤41.0 |
1.46±0.30 |
25 |
25 |
45-75 |
| Φ90 |
≥90 |
0.70±0.18 |
≤46.0 |
1.46±0.30 |
25 |
25 |
50-88 |
Note: Specifications of Φ30 and above default to G tube, ensuring environmental compliance with EU RoHS2.0 (2011/65/EU standard).
1. Operating Conditions
1.1 The ambient temperature for continuous operation ranges from -55°C to 125°C.
1.2 Designed for prolonged use under both acidic and alkaline conditions.
1.3 Suitable for extended use under stringent environmental protection requirements.
2. Appearance Requirements
2.1 The product surface is free from obvious scratches, unevenness, or bamboo-joint-like defects.
2.2 Surface is smooth, devoid of oil stains and dust.
2.3 Printing is sharp and clear, without ghosting, excess ink, incomplete printing, or slippage.
3. Heat Shrinkage Performance
3.1 Initial shrinkage temperature is 70°C; full shrinkage at 125°C.
As per UL224 standard, the complete shrinkage temperature reaches 200°C for a duration of 3 minutes.
3.2 The longitudinal shrinkage rate is within ±5%.
4. Performance Characteristics of Materials
The materials' physical and chemical properties align with the specifications in Table 1.
The product dimensions for halogen-free flame-retardant thin-wall heat-shrinkable sleeves align with Table 2 specifications.
The dimensions for halogen-free flame-retardant heat-shrinkable sleeves comply with Table 3 specifications.
Standard colors include black, red, blue, yellow, green, and white. Additional color options such as purple, gray, brown, etc., are customizable to meet customer preferences.
To ensure the heat-shrinkable sleeve achieves a perfect and thorough shrinkage during usage, it is crucial to employ a forced-air-type constant-temperature oven. Set and maintain the shrinkage temperature meticulously at 125°C. Be vigilant, as the oven's temperature may initially drop when the sleeve is introduced, requiring some time to attain the desired temperature. Additionally, allow time for the sleeve to reach its ultimate shrinkage temperature through the oven's hot air circulation. To guarantee the sleeve is fully shrunk and fitting impeccably, ensure the oven reaches and stabilizes at the set temperature, sustaining it for approximately 3 minutes.
8. Application Field
8.1 Insulation protection for electronics internal wiring
8.2 Insulation protection for electronics internal wiring
8.3 Waterproof and dust-proof protection for communication cables
8.4 Secure protection for household wire connections
8.5 Crafting materials for DIY jewelry making
Company Profile
Dongguan Zhonghe Electronics Co., Ltd. is a pioneering and dynamic technology-driven enterprise, renowned for its expertise in the development, production, and sales of high-quality polymer modified protective materials. Our commitment extends beyond mere products, offering comprehensive one-stop solutions tailored to meet diverse needs. Established in 2010, our headquarters is strategically located in the vibrant Qingxi Town, Dongguan City. In 2020, we expanded our production capabilities by launching a branch factory in Jiangsu, boasting an impressive construction area exceeding 15,000 square meters.
Reflecting our business philosophy, Dongguan Zhonghe Electronics Co., Ltd. embodies unity and win-win cooperation, a principle ingrained in our company name itself. Our dedicated team is passionately committed to the mission of 'escorting the Internet of Things,' ensuring we consistently deliver exceptional value and joy to our esteemed customers. We extend a warm welcome to both domestic and international clients to visit our facilities for fruitful negotiations and partnerships!
Currently, Dongguan Zhonghe Electronics Co., Ltd. proudly serves an extensive clientele in 102 countries worldwide, including over 3,000 satisfied customers. Our high-performance protective sleeves, produced annually, are capable of encircling the globe three times, with an impressive output of over 60 million meters dedicated to the automotive sector. As a trusted long-term supplier, we partner with numerous renowned automobile OEMs and globally acclaimed companies, reinforcing our stature in the industry.
Certifications
Dongguan Zhonghe Electronics Co., Ltd. proudly stands as a testament to superior quality and environmental stewardship, having achieved prestigious certifications such as ISO9001, IATF16949, and ISO14001. Our state-of-the-art production management is empowered by the MES system, ensuring unparalleled product consistency and boasting a remarkable 5% reduction in loss compared to industry peers. Our dedicated and innovative R&D team, alongside our cutting-edge laboratory, holds an impressive portfolio of intellectual property with 5 invention patents and 18 utility model patents. Committed to excellence, we ambitiously introduce 3-5 ground-breaking new products annually, continuously evolving to meet the ever-changing demands of our valued customers.
Exhibition & Our Partners
Packaging & Shipping
01 : Why choose us?
A: 1. We boast over 15 years of dedicated experience within this industry, ensuring expertise and reliability!
2. Exceptional research and development capacity - Our highly skilled technical team is equipped to innovate and design products tailored precisely to meet customer specifications and expectations!
3. Our professional sales team is committed to delivering outstanding service and support to all our valued clients!
02 : What's the MOQ for your production?
A: We graciously accommodate both large-scale and smaller orders. Please reach out for more detailed information.
03: Can I expect to receive a sample? How long can I anticipate waiting for it?
A: Absolutely! We provide complimentary samples for testing purposes, with an expected delivery timeframe of about 4-6 days.
Shipment times may vary based on distance and the chosen courier service.
04 : Can you do the design for us?
A: Certainly, as a professional manufacturer, we are adept at crafting designs that cater to your needs.
05 : What's your payment term?
A: We require a 30% T/T Deposit with the balance due before shipment.
06 : What's the list of certificates you hold?
A: We proudly hold the following certifications: IATF16949, RoHS, CE, EN45545 Test Report, and ELV Test report.
Audited Supplier 
){kind=link}